Fire Safety & Hazardous Zone Engineering
ISO 9001:2015

Spark Arrestor Silencer Manufacturer

Centrifugal Carbon Extinction & Acoustic Attenuation (15 kVA – 3500+ kVA)

Bhavani Engineering manufactures heavy-duty centrifugal spark arrestor silencers designed for diesel generators, fire pumps, compressors, and marine auxiliary engines operating in flammable and hazardous environments. Intercepts and extinguishes 99%+ of incandescent exhaust carbon sparks while providing 20 to 35 dB(A) acoustic noise reduction.

>99% Spark Retention20–35 dB(A) AttenuationCleanout Port
Spark Arrestor Generator Exhaust Silencer manufactured by Bhavani Engineering
Centrifugal Swirl Vane Design>99% Spark Retention

Engineered for refineries, chemical depots, and marine auxiliary engines operating in explosive zones.

Spark Retention
> 99%
Carbon Extinction
Noise Reduction
20 – 35 dBA
Acoustic Loss
Soot Cleanout
Inspection Port
Bolted / Threaded
Engine Range
15 – 3500+ kVA
All Engine Makes
Spark Extinction Physics

Centrifugal Separation vs. Wire Mesh Screens

Why heavy-duty industrial operators refuse wire mesh arrestors in favor of continuous centrifugal cyclonic swirl vanes.

Bhavani Swirl TechnologyNon-Clogging Flow

Centrifugal Cyclonic Vanes

Engineered stationary swirl vanes force the high-speed exhaust gas into a tight spiral vortex. Centrifugal acceleration spins incandescent carbon flakes outward, trapping them into an isolated lower collection chamber where they cool and extinguish safely.

  • Non-clogging internal geometry preserves engine backpressure (<6.0 kPa)
  • Easy cleanout access port for routine carbon flake disposal
  • Extinguishes sparks before they reach flammable ambient vapors
Outdated DesignHigh Failure Rate

Restrictive Wire Mesh Screens

Conventional spark screens use simple stainless steel wire mesh over the exhaust outlet. In diesel applications, carbon soot and oil vapors rapidly coat the wire mesh, creating severe airflow restriction, catastrophic backpressure spikes, and potential turbocharger failure.

  • Clogs within 100–200 operating hours under heavy diesel load
  • Requires frequent, hazardous dismantling to wire-brush
  • Screen burn-through allows undetected sparks to escape
Heavy Metallurgy

Engineering Specs & Severe Duty Metallurgy

Constructed from heavy-gauge structural plates and certified austenitic stainless alloys to endure extreme heat and corrosive industrial atmospheres.

Heavy-Gauge Shell

Fabricated using 4 mm to 8 mm thick IS 2062 Grade B structural carbon steel or SS 304/316L, fully seam-welded to ASME Section IX boiler and pressure vessel codes.

650°C Thermal Rating

Finished with high-temperature silicone HR Black ceramic heat-resistant coating, tested to resist thermal shocks up to 650°C continuous exhaust temperature.

Dual-Stage Acoustic Core

Combines reactive expansion silencing with high-density mineral wool absorptive packing to deliver 20 to 35 dB(A) acoustic attenuation alongside spark interception.

Rapid Cleanout Box

Equipped with heavy-duty bolted gasketed inspection cover or BSP threaded plug at the lowest point, allowing quick removal of collected carbon debris during maintenance.

Hazardous Environments

Where Spark Arrestor Silence is Mandatory

Engineered for high-risk industrial facilities where an escaped exhaust spark can ignite vapor clouds, combustible dust, or fuel storage.

PESO / OISD Safety Norms

Petrochemical & Oil Refineries

Mandatory safety equipment on standby generator sets and emergency fire water pumps located within hydrocarbon processing zones and tank farms.

IRS & Marine Survey Standards

Marine & Offshore Vessels

Installed on tugboats, barges, offshore supply vessels (OSVs), and drilling rigs to prevent hot stack carbon from igniting marine deck cargo.

Hazardous Zone 1 & 2 Compliance

Chemical Plants & Solvents Depots

Prevents glowing exhaust carbon sparks from coming into contact with volatile organic chemical vapors and solvent storage tanks.

Combustible Dust Fire Prevention

Grain Elevators, Sugar & Flour Mills

Agricultural dust clouds (grain, flour, starch) are highly explosive. Spark arrestors eliminate the primary ignition hazard from diesel auxiliary drives.

Engineering Consultation

Frequently Asked Questions: Spark Arrestor Silencers

Clear technical guidance on spark retention physics, backpressure compliance, and hazardous zone regulations.

QHow does a centrifugal spark arrestor silencer work?

A centrifugal spark arrestor silencer directs hot exhaust gases through angled stationary internal swirl vanes. This forces the exhaust stream into high-speed rotational vortex flow. Heavy, glowing carbon and soot particles are thrown outward against the chamber casing by centrifugal force, dropping safely into an integrated carbon collection trap box, while the clean exhaust gas passes through acoustic baffles and exits safely.

QWhy are centrifugal swirl spark arrestors superior to wire mesh spark screens?

Traditional wire mesh screens quickly accumulate soot and unburned diesel carbon, choking exhaust flow and causing severe engine backpressure spikes that can blow turbochargers. Centrifugal spark arrestors contain no restrictive mesh screens to clog. They provide non-clogging continuous spark extinction with reliable low backpressure (< 6.0 kPa) over thousands of operating hours.

QWhich industrial sectors require spark arrestor silencers on diesel engines?

Spark arrestors are legally mandatory on diesel generator sets, fire pump drives, air compressors, and material handling engines operating in classified hazardous atmospheres (PESO / ATEX Zone 1 & 2). Typical deployments include petroleum refineries, chemical processing units, LPG/LNG bottling terminals, offshore drilling platforms, marine engine rooms, grain elevators, and paper/flour mills.

QDoes the spark arrestor silencer include a cleanout inspection port?

Yes. Every Bhavani Engineering spark arrestor silencer features a heavy-duty bolted or threaded cleanout inspection port on the particle collection trap. This allows plant maintenance teams to inspect and empty trapped carbon flakes during scheduled generator servicing in less than 5 minutes.

QCan you manufacture spark arrestor silencers in Stainless Steel SS 316L for marine and offshore duty?

Yes. While standard industrial silencers use heavy-gauge IS 2062 Grade B structural steel, we frequently manufacture spark arrestor silencers in marine-grade Stainless Steel SS 304, SS 316, or SS 316L for offshore supply vessels, coastal refineries, and corrosive chemical environments.

Direct Engineering RFQ • Narol Works

Custom Silencers Engineered to Your Exhaust Specs

Send us your engine capacity, backpressure limits, or CAD drawings. We calculate attenuation geometry and fabricate to exact ISO 9001 standards.

ISO 9001:2015

Certified QMS

< 24h

Drawing Review

Pan-India

Direct Delivery